Hi Bartley, Great question! I'm going to try to answer by first explaining how the sensor data is handled. EasyBloom looks at light, temperature, and humidity data in terms of a 24-hour cycle. Regardless of the number of times you press the start and stop button during deployment, EasyBloom will map all this data on a 24-hour grid. If it has enough data to make an accurate depiction of the 24-hour cycle of that location, it will give recommendations based on this data. Soil data is a little different, since it does not operate on a 24-hour cycle. But again, all of it is used together in the same reading. So you can upload multiple sampling intervals from the same location, and EasyBloom will make correct recommendations as long as it has enough data. To get recommendations for multiple locations, you will have to upload your data before you move the sensor each time, otherwise it will lump all the data together. Does that answer your questions? Also (since we love to hear feature ideas from our customers!) would you like a feature where you could collect data from multiple locations without plugging in the sensor in between? Thanks! ~MattE
