EasyBloom Forum

Having lost two or three readings because the battery voltage was on the lower limits when the recommend mode was started. This meant that as the monitoring progressed the battery voltage dropped below a usable threshhold and the monitoring was lost. To look at the battery voltage requires one to open the upload screen and view its measurement. My suggestions would be to have the program check the voltage during upload, or some other stress point, and alert the user when the potential for battery failure is present. Thanks Rick

Hey Rick...I understand where you're coming from. This has happened to me and I assume others as well. I also want to mention that it sounds like you have been listening in on our conversations around here at the EasyBloom offices. Your suggestion has been discussed and several ideas to remedy the battery interface have come across our desks for us to noodle over. I appreciate your feedback and am happy to say this is currently being worked on. Cheers...Robby